Vertical-Spiral Escape Chute(For Fire Brigade)

Vertical-Spiral Escape Chute(For Fire Brigade)

This Vertical-Spiral Escape Chute is fabric chute attached to a metal frame and held together with support belts. It is designed to be installed to fire engine or fire brigade for the rescue and to evacuation people with speed and safety.

Same as Vertical-Spiral Type Escape Chute.

1. Please use the product is used for the purpose of evacuation when the fire is put to emergency situations everywhere, if you use wrong way cause the human or material damages, serious injury or death are issued due to use depending on usage.
2. When you open the frame without careful, it may be damage with spare part and frame such as exit windows or parts attached to the frame will occur.
3. The folded frame have to carefully attention with your fingers or body parts, if you are not carefully, it may occur tight or bad situations.
4. If when Escape Chute use with twisted on the outside or contact obstacle, it may be occurred to shock and/or damage.
5. Vertical-spiral chute should be installed in vertical buildings or structures suitable for vertical escape chute.
6. Exposed areas of the body should be minimized when going down, and exposed friction may cause damage to the skin when you going down by Escape chute.
7. If you think the speed of descending is fast when descending, you can fold and unfold both elbows and adjust the speed repeatedly.

• Material used: Flame retardant
• Length of the Chute is measured from the ground to the window frame.
• Length of chute: Customization is available
• Classification
  ISO9001:2015 ISO14001:2015 EN ISO6941 DIN EN 20811 DIN EN ISO 13938-1:999 BS5438 DIN 14151-3. DIN 53354:1981 DIN 4102 B1 DIN 53352 DIN 53353 DIN 53363 DIN 53886 DIN 53361 NFPA 701,M2,CL2,LSG